Audio Setup - Ganz DIGIMASTER DR-16M55-RA-4TB User Manual

Audio Setup

You can configure audio related settings (channel and network transfer) and signal beep for remote control operations.
Audio
\ \
Choose whether to receive the live sound source and select an audio channel.
From <SYSTEM SETUP> - <AUDIO>, select
1.
<AUDIO>.
Use the [ /ENTER] buttons on the remote
▲▼ ◀▶
2.
control or use the mouse to select an item that you
want to edit.
AUDIO OUTPUT TYPE : You can select and use
i
the conventional RCA audio output or the HDMI
audio output.
DEFAULT LIVE AUDIO CHANNEL : select an audio
i
channel to monitor on the live screen.
NETWORK AUDIO TRANSMISSION : decide if
i
DVR transfers the audio signal to the remote client.
DVR PC (Remote Client)

RECEIVE NETWORK AUDIO : decide if DVR receives the audio signal from the remote client.
i
PC (Remote Client)
To apply the change, click <APPLY> in the bottom of the screen.
3.
When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
4.
message appears and you will return to the previous menu.
Buzzer
\ \
You can set to output the buzzer if you manipulate the remote control.
From <SYSTEM SETUP> - <AUDIO>, select
1.
<BUZZER>.
Use the [ /ENTER] buttons on the remote
▲▼ ◀▶
2.
control or use the mouse to select an item that you
want to edit.
REMOTE CONTROLLER BEEP : specify the
i
output of a beep when you press a button on the
remote control.
KEYPAD : Select whether to output the buzzer
i
when pressing keypad or not.
To apply the change, click <APPLY> in the bottom of
3.
the screen.
When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
4.
message appears and you will return to the previous menu.
DVR

49
|
English