Supplies; Ribbon; Optional Cutter; Accessories - Avery Dennison Monarch 9419 Manual

S u p p l i e s
Supply Type:
Supply Widths:
Supply Lengths:
Thickness:
Wind Direction:
Core Diameter:
Internal Label Roll OD: 5.0 inches (127mm)
External Label Roll OD: 8.0 inches (203mm) – requires optional adapter
R i b b o n
Ribbon Length:
Ribbon OD:
Ribbon Core ID:
Ribbon Wind Direction: Ink side out
O p t i o n a l C u t t e r
Supply Type:
Tag Widths:
Tag Lengths:
Tag Thickness:
Print Speed:
A c c e s s o r i e s
131688
13007604
12808745
131795
131796
131798
126894N
A-2 Equipment Manual
Labels and tags, perforated or continuous
0.75 inches (19mm) minimum
4.4 inches (112mm) maximum
0.12 inch (3mm) minimum for non-peel mode
1.0 inch (25.4mm) minimum for peel mode
6.0 inches (152.4mm) maximum for peel mode
10 inches (254mm) recommended for non-peel mode
longer lengths are supported up to 1000 inches (25,400mm)
maximum for 203 dpi; and 450 inches (11,430mm) maximum for
300 dpi. Contact your Avery representative for supply
recommendations.
0.002 inches to 0.010 inches (0.055mm to 0.254mm)
Inside or Outside wound
Note: For inside wound supply, the maximum label length is 6.0
(152.4mm) inches with a 3-inch (76.2mm) core.
1.0 inch (25.4mm) to 1.5 inch (38.1mm), cardboard
300 meters (11,811 inches)
2.7 inches (67mm) maximum
1.0 inch (25.4mm)
Tags, perforated or continuous
The maximum width using 10 mil (10 point) tags with the cutter
is 1.5 inches; with thinner tag supply, the maximum cut width is
4.0 inches (101.6mm)
The minimum tag width is 0.75 inches (19mm)
The minimum tag length is 1.0 inches (25.4mm).
The maximum tag length is 10.0 (254mm)
up to 10 mil (10 point)
The maximum print speed with the cutter is 3.0 ips.
USB keyboard
MicroSD Card
Extra Ribbon Core
203 dpi replacement printhead
300 dpi replacement printhead
Wi-Fi Radio
External Rewinder – includes a 3.0 inch (76mm) core