Loading Labels For Peel Mode - Avery Dennison Monarch 9419 Manual

L o a d i n g L a b e l s f o r P e e l M o d e
In peel mode, the printer separates the liner from the label.
♦
minimum feed length is 1.0 inches.
♦
maximum speed is 3.0 inches (76 mm) per second.
♦
use non-perforated supplies.
Note: You may want to set the printer for on-demand mode. Hold the leading edge of
peeled labels when printing on stock longer than six inches.
Adjust the platen roller based on supply thickness if necessary. See
Platen Roller" for more information.
Turn the cover latches and lift the cover.
1.
Use your thumb to separate the supply holders.
2.
Place rolled supply (printing side up) into the supply holder. Release the supply
3.
holder. The supply holders should fit snugly against the supply.
2-4 Equipment Manual
"Adjusting the