Dca Assign Screen - Yamaha RACK Reference Manual

SEND FROM screen menu
Press the Menu key ( ) from the SEND FROM screen to display the following options.
NOTE
This menu is not available for MATRIX channels 1–4.
1
All Pre
Turns on all Pre buttons.
2
All Post
Turns off all Pre buttons.
3
All Nominal (V2.0 and later)
Sets all SEND levels to nominal (0 dB).
4
Dup. STEREO (V2.0 and later)
Duplicate STEREO. Copies each channel's fader
level and applies it to the SEND level.

DCA ASSIGN screen

Allows you to group channels together by assigning them to DCA groups.
1
Channel display area
Displays the channels that are assigned to the current DCA group.
2
DCA ASSIGN buttons
Allow you to select which channels are assigned to the current DCA group.
Selected channels are highlighted.
3
CH VIEW button
Displays the CH VIEW screen.
4
Recall Safe button (V1.1 and later)
Turns recall safe on and off for the corresponding channel.
You can display the RECALL SAFE screen by touching the jump button in the right corner
of the Recall Safe button.
- 75 -
Configuration screens
(page 63)
TF Series
Reference Manual