Emerson Rosemount 2051 Reference Manual page 21

Reference Manual
00809-0100-4107, Rev BA
Figure 2-3. Device Dashboard
Configuring with AMS Device Manager
Full configuration capability with AMS Device Manager requires loading the most current Device
Descriptor (DD) for this device. Download the latest DD at www.emersonprocess.com or
www.hartcomm.org.
Note
All steps using AMS Device Manager will be described using version 11.5.
Configuring with a Local Operator Interface
The LOI requires option code M4 to be ordered. To activate the LOI push either configuration
button. Configuration buttons are located on the LCD Display (must remove housing cover to
access), or underneath the top tag of the transmitter. See
functionality and
configuration, several features require multiple screens for a successful configuration. Data
entered will be saved on a screen-by-screen basis; the LOI will indicate this by flashing "SAVED"
on the LCD Display each time.
Local Operator Interface menu trees are available in
Configuration
2051 FT 45B
Online
1. Overview
2. Configure
3. Service Tools
SAVE
Figure 2-4 for configuration button location. When using the LOI for
Section 2: Configure
Table 2-2 for configuration button
Appendix D: Local Operator Interface .
April 2013
11