System Readiness; Confirm Correct Device Driver - Emerson Rosemount 2051 Reference Manual

Section 2: Configure
April 2013
Explosions could result in death or serious injury:
Installation of this transmitter in an explosive environment must be in accordance with the
appropriate local, national, and international standards, codes, and practices. Please review
the approvals section of the Rosemount 2051 reference manual for any restrictions
associated with a safe installation.


Process leaks may cause harm or result in death.

Electrical shock can result in death or serious injury.

2.3

System readiness



2.3.1

Confirm correct Device Driver

Verify the latest Device Driver (DD/DTM) is loaded on your systems to ensure proper communi-
cations.
1. Download the latest DD at www.emersonprocess.com or www.hartcomm.org.
2. In the Browse by Member dropdown menu, select Rosemount business unit of Emerson
Process Management.
3. Select desired Product
a.
8
Before connecting a Field Communicator in an explosive atmosphere, ensure the
instruments in the loop are installed in accordance with intrinsically safe or
non-incendive field wiring practices.
In an explosion-proof/flameproof installation, do not remove the transmitter covers
when power is applied to the unit.
Install and tighten process connectors before applying pressure.
Avoid contact with the leads and terminals. High voltage that may be present on leads
can cause electrical shock.
If using HART based control or asset management systems, confirm the HART
capability of such systems prior to commissioning and installation. Not all systems are
capable of communicating with HART revision 7 devices.
For instructions on how to change the HART revision of your transmitter, see
"Switching HART Revision" on page
Within Table 2-1, use the HART Universal Revision and Device Revision numbers to find
the correct Device Driver
80.
Reference Manual
00809-0100-4107, Rev BA
Configuration