Brocade Communications Systems ICX 6430 Hardware Installation Manual page 33

2. Using a Phillips screwdriver, attach the wall mount brackets to the sides of the device using four sink-head screws.
FIGURE 24 Attaching the wall mount brackets for ICX 6430-24 devices
3. Drill two holes on the wall where you want to mount the device.
4. Hammer two wall mount anchors into the holes on the wall.
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
Part Number: 53-1003617-03
Installing the device
33