Brocade Communications Systems ICX 6430 Hardware Installation Manual page 31

5. Using a Phillips screwdriver, mount the device in a two-post rack using four rack-mounting screws.
NOTE
The ICX 6430 and ICX 6450 devices must be installed on two-post racks only. The devices cannot be installed on
four-post racks.
FIGURE 23 Installing the device in a two-post rack
1. Rack-mounting screws
2. Cage nuts
6. If installing a single device only, proceed to
the rack, one below the other.
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
Part Number: 53-1003617-03
Powering on the system on page 48. If installing multiple devices, mount them in
Installing the device
31