Copper or fiber-optic module replacement
3.
Unlock the copper or fiber-optic module by pulling the bail latch forward, away from the front panel of the module. This unlocks
the module from the front panel.
NOTE
On 1000Base-SX ports, the bail latch is enclosed in a black sleeve, and on 1000Base-LX ports, the bail latch is
enclosed in a blue sleeve.
FIGURE 53 Unlocking the bail latch
1.
Bail latch
NOTE
The bail latch may be attached to either the top or the bottom of the SFP transceiver.
4.
Grasp the bail latch and pull the copper or fiber-optic module out of the port.
FIGURE 54 Removing the fiber-optic module
5.
Store the copper or fiber-optic module in a safe, static-free place or in an anti-static bag.
6.
Install a new copper or fiber-optic module in the port.
86
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
Part Number: 53-1003617-03