Fault Messages; Service Interval And Bgr Display - Miele PW 413 Operating And Installation Instructions

Troubleshooting
Service interval
and BGR display

Fault messages

66
The door can now be opened.
If the following message appears after "Power On" in the machine
display, either a service or the annual BGR check must be carried
out.
Service interval

Call the Service Department.
BGR Test

Call the Service Department.
The display will go out after 5 seconds.
 Repairs to electrical, gas and steam heated machines should
only be undertaken by a suitably qualified service technician to en-
sure safety. Unauthorised or incorrect repairs and other work by
unqualified persons could be dangerous.
Malfunctions occurring before or after the start of a programme will
be shown in the display.
The display remains dark. There is no power to the machine.
Check the plug connectors, mains switch and (on-site) fuses.

Power cut

Programme stopped.
Press the start button.


When the power has been restored press "START".

Tip: This error message can mean: The motor thermo-switch of the
drive motor has been triggered.
Allow the motor to cool down.

1


