Dispensing Throughput (D1 To D13) - Miele PW 413 Operating And Installation Instructions

Dispenser calibration  Dispenser pump 1
V: 100 ml t:
- OK +
Enter the amount measured in field "V:".

The throughput P is calculated in ml/min. by the controls.
Press the  "Save" button.

The measured value is assigned to the pump.
Reattach the hose.


Dispensing throughput (D1 to D13)

The throughput of the connected dispensing pumps can be set from
0 ml/min to 9999 ml/min in 1 ml/min steps.
Access the following content:

Supervisor level  Settings
Dispensing throughput
Dispensing correction factor
OK
 
Select "Dispensing throughput".

The following will appear on the display:
Settings  Dispensing throughput
Dispenser pump 1 : 100,0 ml/min
Dispenser pump 2 : 100,0 ml/min
OK
 
Options:
– No
– 1 to 9999.0 ml/min
30 s P: 200,0 ml/min
0/1

Settings option






99