Cleaning And Care; Build-Up Of Rust - Miele PW 413 Operating And Installation Instructions

Cleaning and care

74
Cleaning and care
Carry out cleaning and maintenance of the machine after use if pos-

sible.
Do not use a pressure washer or hose to clean the machine.
Clean the machine casing, control panel and plastic parts with a

mild non-abrasive cleaning agent or with a damp cloth only. Wipe
dry with a soft cloth.
Scouring agents will scratch the surface.
Clean stainless steel casing with a proprietary stainless steel

cleaner.
Remove any deposits from the door seal with a damp cloth.

Penetration of cleaning agents into electrical components.
When disinfecting the surfaces, use a damp cloth only to clean the

front and around the door lock. Do not spray any liquids.
Clean stainless steel casing with a proprietary stainless steel

cleaner.
Remove any deposits from the door seal with a damp cloth.

Tip: Heavy deposits of dust around the fan housing should be re-
moved with a vacuum cleaner. The fan housing is located on the back
of the machine.

Build-up of rust

The drum is manufactured from rust-free stainless steel. Water or for-
eign objects containing ferrous substances (e.g. paper clips, metal
buttons or metal swarf) which are placed in the machine with the
laundry can cause a build-up of rust in the drum. Clean the drum reg-
ularly in this case and if rust occurs, remove it immediately with a pro-
prietary stainless steel conditioner. Check the door seals for metal
objects and clean thoroughly as described above. This must be car-
ried out regularly.