Washing; Detergent Dispensing; Amount Of Detergent; Water Hardness Levels - Miele PW 413 Operating And Installation Instructions

Amount of deter-
gent
Water hardness
levels
Selecting a pro-
gramme

Detergent dispensing

Avoid dispensing more than the required amount as this can cause
excessive foaming.
– Only use low foaming detergents.
– Dispense according to the detergent manufacturer's recommenda-
tions.
The amount to dispense will depend on:
– the amount of laundry
– the water hardness level in your area
– the type and amount of soiling level in the laundry
Please dispense according to water hardness levels and follow the
detergent manufacturer's instructions.
Hardness range
I (soft)
II (medium)
III (hard)
Check with your local water supplier if you do not know the water
hardness in your area.
The first 6 programmes can be selected directly using buttons 1 - 6.
6 Delicates
50 °C Main wash
Rinses
1 2
Other programmes can be selected by pressing and holding but-

ton 6 .
Tip: The same applies in other displays for buttons 12 and 18.
8 Separate rinse
Rinses
7 8

Select a programme by pressing one of the programme buttons.

The following (e.g.) will appear in the display:
6 Mops first wash
50 °C Main wash
Rinses
1 2
Hardness in mmol/l
0 - 1.5
1.5 - 2.5
above 2.5
13,0/13,0 kg
1025
3 4 5

13,0/13,0 kg
1025
10
9 11

13,0/13,0 kg
1025
3 4 5


Washing

German scale °dH
0 - 8.4
8.4 - 14
above 14
rpm
6

rpm
12

rpm
6

27