Dispenser Calibration - Miele PW 413 Operating And Installation Instructions

To go directly to
"dispenser calib-
ration" when the
machine is
switched off:
Washing without dispenser compartment

Dispenser calibration

Dispensing calibration is used to measure the throughput of individual
dispensing pumps.
Press and hold multifunction button 2 and switch the machine on

with Power on .
Dispenser calibration
Dispenser pump 1
Dispenser pump 2
Options:
– Dispenser pump 1 to 13
Select a dispenser pump.

When a dispenser pump is selected, the following will appear in the
display:
Dispenser calibration  Dispenser pump 1
V: 100 ml t:
Tip: The dispensing amount can be set from 0 to 9999 ml in 1 ml in-
crements.
Press multifunction button 0/1.

The dispensing hose will fill up.
Stop the process by pressing button 0/1.

Run the hose of the dispenser pump that is being checked upwards

into a measuring vessel.
 Irritant agents.
Skin and eye irritation.
Avoid contact with skin and eyes, wear protective clothing.
Return to the main menu by pressing "Back".

Dispenser calibration
Dispenser pump 1
Dispenser pump 2
Select a dispenser pump.

Main menu

0s P: No
0/1

Main menu






25