Installation On A Raised Plinth; Transport Safety Panels; Removing The Transport Safety Panels - Miele PW 413 Operating And Installation Instructions

Installation on a raised plinth

When installed on a raised plinth, the machine must be secured to the
plinth. When installed on a concrete base the machine must be se-
cured to the base. The plinth must be secured to the floor.

Transport safety panels

Removing the transport safety panels

The 2 transport safety panels at the front are each secured with 3
hexagon screws. The transport safety panels at the back are each se-
cured with 4 hexagon screws. The transport safety panels must only
be removed when the machine is in place, before it is commissioned.
Remove the front and back panel:

Unscrew the screws at the bottom of the front panel and remove

the panel.
Installation and connection
79