'Clean machine' programme
For cleaning the detergent dispenser drawer, the drum, the suds container and the
drainage system.
Carry out the "Clean machine" programme regularly if you frequently use disinfection
programmes or low temperature programmes, or to get rid of coarse soiling.
Clean machine*
Material
Programme se-
quence
* The Cleaning block which takes water in through all inlets and has the temperature increased to 70 °C. can be selected
with this programme by pressing the Block Plus button. If the Cleaning block is included in the Maintenance programme,
detergent needs to be dispensed.
Separate drain programme
Separate drain
Material
Programme se-
quence
Cottons
Cottons
Material
Programme se-
quence
* The standard programmes Cottons 90 °C and Cottons 60 °C are programmed for hot water rinse. If hot water is avail-
able, we recommend using hot water for the final rinse.
- There is less residual moisture in the laundry after spinning.
- The laundry is already warmed.
- This saves time and energy if the laundry is immediately either dried in a tumble dryer or ironed with a rotary ironer.
Without load
+ Cleaning 70 °C, optional
2 rinses
Water drainage
90 °C
Cotton, linen and mixed fibre fabrics, for example
bed linen and towelling
+ Pre-wash 40 °C, optional
Main wash 90 °C, Cool down can be selected
2 rinses
Last rinse hot*
Final spin
Programme chart - SLUICE
Fill ratio/Load
size
1:10
PW 413 - 13 kg
PW 418 - 18 kg
51