Fault Messages After A Programme Has Been Cancelled - Miele Passion WWV980 WPS Operating Instructions Manual

Fault messages after a programme has been cancelled

Problem

Drainage fault. Clean
drain filter and pump.
Check the drain
hose.

Water intake fault.
Turn on the tap.

Fault F. If restart
fails, call Miele.

Waterproof system
activated. Turn off
the tap. Call Miele.
To switch off the fault messages: Switch the washing machine off with the 
sensor.
Possible cause and remedy
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
 Clean the filters and the drain pump.
 The maximum drain height is 1.0 m.
The water inlet is blocked or restricted.
 Check whether the tap is turned on properly.
 Check whether the inlet hose is kinked.
 Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
 Clean the filter.
There is a fault.
 Disconnect the washing machine from the mains
electricity supply, either by switching it off at the
wall socket and withdrawing the plug, or by
disconnecting it at the circuit breaker.
 Wait at least 2 minutes before reconnecting the
washing machine to the mains electricity supply.
 Then switch the washing machine on again.
 Restart the programme.
If the fault message appears again, contact Miele.
The water protection system has reacted.
 Turn off the tap.
 Call Miele.
Problem solving guide
73