Access to Supervisor level / changing the password
Password
The supervisor level is accessed by entering a four-digit password
from the character set provided. It can only be selected at the start or
end of a programme.
Press the button until the symbol changes to .
Press the button again.
The following will appear in the display:
Settings
Main menu
OK
Select "Supervisor level" and press OK. The password entry screen
will appear.
The first time you access the supervisor level, enter the password
"M1LE".
_ _ _ _
Password:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789
OK
Select a letter or digit and confirm your entry with the OK button.
When OK is pressed, the character selected will appear in the corres-
ponding position.
Press the "Save" button once you have entered all four charac-
ters.
The supervisor level will open once you have entered the password.
Supervisor level
Language
english (GB)
Time/Date
: 11:43
OK
If no function is carried out within 30 seconds, if the button is
pressed, or if an incorrect password is entered, the same display
content will be shown as after a power interruption.
Back
Language
Supervisor level
Main menu
12.5.2015
87