Dispensing Correction Factor (D1 To D 13) - Miele PW 413 Operating And Installation Instructions

Settings option
100

Dispensing correction factor (D1 to D 13)

The correction factor can be used if an adjustment is made to the li-
quid dispensing. If, e.g. the dispensing agent for Dispensing pump D
1 were altered (to a higher concentration), a rapid modification can be
made with the correction factor.
Calculate the correction factor using the following formula:

Correction factor D1 =
Access the following content:

Supervisor level  Settings
Dispensing correction factor
Dispenser level reminder
OK
 
Select "Dispensing correction factor".

Supervisor level  Settings
Dispenser pump 1 : 1,00
Dispenser pump 2 1,00 :
OK
 
You have the following options:
– 0.01 to 1.99
– 2
Once you exit the supervisor level, the new dispensing amounts are
used in the programmes but the programming is not changed.
New quantity Dos-p. D1
Current quantity Dos-p. D1






