Fault Messages In The Display - Miele PW 6163 Operating And Installation Instructions

Fault messages in the display

Message
Service interval Call the Ser-
vice Department.
Water inlet fault Call the Ser-
vice Department if restart
does not work.
Door lock fault Call the Ser-
vice Department if restart
does not work.
Heating system fault Pro-
gramme stopped. Press the
start button.
Drive motor fault Programme
stopped. Press start. Motor
overheating.
Imbalance fault Call the Ser-
vice Department if restart
does not work.
Drain valve fault Call the Ser-
vice Department if restart
does not work.
Dispensing system fault Fill
dispenser ??. Press the start
button.
Cause and remedy
The washing machine needs to be serviced by the Cus-
tomer Service Department.
Contact the Customer Service Department.

A fault has been identified in the water inlet.
Check the stopcock.

Switch the washing machine off and on again.

Contact the Customer Service Department if a restart does
not work.
The door is not closed properly. The door lock could not
engage.
Close the door again.

Start the programme again.

Contact the Customer Service Department if a restart does
not work.
A fault has been identified in the heating system.
Contact the Customer Service Department.

Disinfection programmes will be cancelled if this fault mes-
sage appears.
Press the  button to continue the programme without

heating.
The winding protection of the drive motor has been
triggered.
Allow the motor to cool down.

Press the  button when the motor has cooled.

The travel-dependent imbalance switch has been
triggered.
Press the  button.

Contact the Customer Service Department if a restart does
not work.
A fault has been identified in the drainage system.
Check the on-site drainage system.

Press the  button.

Contact the Customer Service Department if a restart does
not work.
The dispenser canister is empty.
Fill or replace the dispenser canister.

Press the  button.

Contact the Customer Service Department if the message
continues to be displayed.
Problem solving guide
63