2.3.10
Initializing the Host System
When a storage pool is created, initialization begins automatically and will continue in the
background until it is completed. Once the storage pool has completed its initialization, its virtual
disk(s) can be accessed immediately.
To monitor the progress of a job, use the SHOW JOB * ALL_ATTRIBUTES command. It will display
the type of job and the percentage of completion
Figure 43. Show Job Example Screen
You may also check if a virtual disk is ready for access using the SHOW VIRTUAL_DISK <id>
ALL_ATTRIBUTES command
Figure 44. Show Virtual Disk Example Screen
0 0 7 - 5 5 3 3 - 0 0 1
RAID$ show job * all_attributes
OID:
0x28000000
Target:
0x19b40000
Type:
INITIALIZE
Status:
RUNNING
Priority:
50
Fraction Complete:71%
(Figure 44)
RAID$ show virtual_disk 0 all_attributes
OID:
0x89ba0000
Name:
89ba0000
POOL OID:
0x19b40003
Capacity:
16384 MBs
Offset:
0x0
State:
READY
Raidlevel:
RAID5
IO ROUTING:
TRUE
WBC:
TRUE
MWBC:
FALSE
Initializing:
FALSE
Paused:
FALSE
AutoWriteLock:
FALSE
Data Lost:
FALSE
Present Home Only:FALSE
Configuring the InfiniteStorage 6120
.
(Figure 43)
.
32
Need help?
Do you have a question about the InfiniteStorage 6120 and is the answer not in the manual?