Software Version History; Version 1.1; Version 1.0 - Sagitter QUIVER User Manual

Software Version History

Release 1.10
New features:
1) Added 'Footswitch cfg.' option in the 'Setup' menu (page 42).
2) Added the keypad for value inputs on effects window (page 30).
3) Added a contextual menu for effects window (page 31).
4) Now the fixtures disabled from "Address patch" window are shown in dark grey color in
the "Editor" window (page 26).
5) In the "Address patch" window both the original name of the fixture and the name
assigned by the user in the Editor contextual menu are shown (page 43).
6) Now the Status Bar shows also the register pages assigned to the QUIVERX expansions
connected to Exp1, Exp2 and to the pedal (page 24).
Fixed bugs:
7) The 'Cross Fade' option in the 'Slider config' contextual menu for Chase/Sequence/Live
windows (page 38-39) has been disabled.
8) If, from "Address patch" window, a DMX universe greater than 3 is assigned with the
"Change Address" command, the display shows "Invalid DMX address" and the fixture
keeps the previously assigned number.
9) A controller assigned as Group Master or Grand Master has always the priority over the
assignment of the same controller as Playback master of the register from cue list
contextual menu.
10) When copying the cue list in a new register, the register number cannot be greater than
12.
11) The name assigned to a cue list from contextual is shown immediately.
Release 1.00
1) Initial release.
60