Fixture Editor For Windows - Sagitter QUIVER User Manual

Fixture Editor for Windows

The FixturEditor.exe program is included in the USB pen drive supplied with the console and can
be also downloaded from the www.sagitter.com web site. This software can run in any computer
with Windows operating system: with a double click on the .exe file you can run it also directly
from the USB pen drive or you can copy it to any folder on your PC's hard disk.
The program allows to create custom fixtures starting from the data written on the user manual of
the fixture, save them on the USB pen drive and copy them on the console by means of the Library
Manager.
Even if the program is very easy to use, the creation of the fixture is recommended only for expert
users.
After launching the program, the following screen appears.
Fixture Editor:
Using the commands 'Add Parameter', 'Move Up', 'Move Down', 'Delete Parameter' you can edit
the parameters, taking them from the user manual of the fixture to be created.
In the following two figures, you can see the editing of some parameters for the Sagitter fixture
'Club Spot 150 ch14.pf': in this specific case the control has been implemented through 14 DMX
channels, which allows a superior resolution for Pan and Tilt.
57