Playback; Cue List - Sagitter QUIVER User Manual

Color picker:
Colors can be selected directly from the color bitmap and luminosity slider on the display or using
the first three Touch Slider. The RGB/CMY/HSB button selects the input mode scrolling through
the three available color modes (Red / Green / Blue, Cyan / Magenta / Yellow and Hue / Saturation
/ Brightness).

Playback

Playback is the moment when, after the programming activity has been completed, the show
begins and you can play and execute (manually or automatically) the cues stored in the various
cue-list.
The console allows the operator to play up to 36 cue-lists at the same time (12 with the console
alone, 36 with both expansions connected), chosen between a set of 144 (12 pages with 12 cue-
list each).
IMPORTANT: the editor and 'Hilite' button always have priority on playbacks and controllers,
therefore, except for specific cases, the transmission of a show occurs after having set the editor to
zero (double click on the 'Clear' key).
The output values of the fixture parameters depend on the active cues. Regarding the values that
are not involved in the active cues:
- for LTP parameters they take the stand-by values if they are defined, otherwise they
remain stable to the latest value previously set by a cue;
- for HTP parameters they are set to zero value.

Cue list

A cue list is an ordered set of cues. Each cue includes the condition of some parameter sets for
several fixtures and the information about their time evolution. Each cue-list can be configured in
four play modes: Qlist, Chase, Sequence or Live. Trigger and time tuning are function of the play
modes.
34