Rev. 01-02/16 INDICE: 1. INTRODUZIONE p. 3 2. ISTRUZIONI DI SICUREZZA p. 4 3. APERTURA CONFEZIONE E CONTROLLO p. 6 4. INSTALLAZIONE ED ACCENSIONE p. 7 5. ISTRUZIONI PER L'USO p. 9 6. MANUTENZIONE p. 12 7. SPECIFICHE TECNICHE p. 13 INDEX: 1.
1. INTRODUZIONE Grazie per avere scelto un nostro prodotto! Vi preghiamo di fare riferimento alle istruzioni e alle avvertenze contenute nel presente manuale per l’utilizzo del dispositivo e di conservarlo per future consultazioni. Il presente manuale contiene informazioni riguardanti l’installazione e l’utilizzo del dispositivo.
2. ISTRUZIONI DI SICUREZZA Attenzione! Questo prodotto non è adatto ad un uso domestico. Leggere il presente manuale prima di installare e dare corrente all’apparecchiatura, seguire le precauzioni di sicurezza elencate di seguito ed osservare tutti gli avvertimenti indicati nel presente manuale e stampati sull’apparecchiatura.
Page 5
CLASSE DI PROTEZIONE IP20 Il dispositivo è protetto contro la penetrazione di corpi solidi di dimensioni superiori a 12 mm (0.47”) di diametro (prima cifra 2), ma non contro la caduta di gocce d’acqua, pioggia, schizzi o getti d’acqua (seconda cifra 0). Usare solo in ambienti asciutti.
4. - INSTALLAZIONE ED ACCENSIONE 4.1 - INSTALLAZIONE PRODOTTO - Non scuotere l'apparecchio. Evitare l'utilizzo di forza eccessiva durante le operazioni di installazione o fissaggio dell'unità. - L'unità può essere installata a pavimento in appoggio sugli appositi piedini in gomma, a parete, a soffitto o su truss.
Page 8
4.2 - COLLEGAMENTO ALLA LINEA DI ALIMENTAZIONE Il dispositivo deve essere collegato ad un sistema di alimentazione dotato di un’efficiente messa a terra. Inoltre, si consiglia di proteggere le linee di alimentazione dei prodotti dai contatti indiretti e/o da cortocircuiti verso massa utilizzando interruttori differenziali opportunamente dimensionati.
- ISTRUZIONI PER L'UTILIZZO 5.1 - MAPPA DEL MENU' Function Mode Dmx Address A001 - Axxx Impostazione indirizzo DMX Channel Mode Standard 13CH Modalità Standard 13 canali Vector 15CH Modalità Vector 15 canali Auto Run Internal Program 1 - 8 Esecuzione programmi interni in modalità...
Page 10
5.2 – MODALITA' DMX Modalità Canali Funzione Valore Descrizione 000 – 255 Movimento Pan PAN fine 000 – 255 Movimento Pan fine TILT 000 – 255 Movimento Tilt TILT fine 000 – 255 Movimento Tilt fine Ruota colori 000 - 009 Open 010 - 019 020 - 029...
Page 11
133 - 140 Gobo 7 shacking da lento a veloce 141 - 148 Gobo 8 shacking da lento a veloce 149 - 156 Gobo 9 shacking da lento a veloce 157 - 164 Gobo 10 shacking da lento a veloce 165 - 172 Gobo 11 shacking da lento a veloce 173 - 180...
1. - INTRODUCTION Thank You for choosing one of Our products! Please refer to the instructions and warnings contained in this user manual, please retain it for future reference. This manual contains information about the installation and use of the device. The information contained in this publication has been carefully prepared and checked.
2. - SAFETY INSTRUCTIONS Caution! This product is not suitable for household illumination. Please read this manual before installing and applying power to the equipment, follow the safety precautions listed below and observe all warnings in this manual and printed on. Please contact a PROEL distributor for assistance with any questions about how to activate the equipment safely.
Page 16
IP20 PROTECTION RATING The device is protected against the penetration of solid bodies larger than 12 mm (0,47 ") in diameter (first digit 2), but not against dripping water, rain, splashes or jets of water (second digit 0). Use only in dry areas. Inside use only. Do not expose the equipment to rain or moisture.
4. - INSTALLATION AND SWITCH ON 4.1 - PRODUCT INSTALLATION - Do not shake the device. Avoid the use of too much force during installation or unit fixing. - The unit can be installed on the floor resting on the rubber feet, on the wall, ceiling or on a truss.
Page 19
4.2 - CONNECTION TO THE MAINS The device must be connected to a power supply system with a proper earth system. Moreover, it is recommended to protect power supply lines of the products from indirect contact and / or shorting to earth by using appropriately sized anti electrical shock switch. The electrical connection must be carried out by a qualified electrician.
5. - SETUP 5.1 – MENU Function Mode Dmx Address A001 - Axxx DMX address setting Channel Mode Standard 13CH Standard Mode 13 channels Vector 15CH Vector Mode 15 channels Auto Run Internal Program 1 - 8 Internal programs in Automatic mode with Master / Alone Master or Alone mode option Music Control...
Page 21
5.2 – DMX MODE Channel Mode Function Value Description 000 – 255 Pan movement PAN fine 000 – 255 Pan fine movement TILT 000 – 255 Tilt movement TILT fine 000 – 255 Tilt fine movement Color wheel 000 - 009 Open 010 - 019 020 - 029...
Page 22
133 - 140 Gobo 7 shacking from slow to fast 141 - 148 Gobo 8 shacking from slow to fast 149 - 156 Gobo 9 shacking from slow to fast 157 - 164 Gobo 10 shacking from slow to fast 165 - 172 Gobo 11 shacking from slow to fast 173 - 180...
140 - 159 Internal program 3 160 - 179 Internal program 4 180 - 199 Internal program 5 200 - 219 Internal program 6 220 - 239 Internal program 7 240 - 255 Internal program 8 Color vector 000 – 255 Color speed from max.