Sagitter QUIVER User Manual page 47

changes applied through this function only affect the current show, leaving the fixture library
unchanged.
To edit a value, you must select it by pressing the corresponding button and use the fourth Touch
Slider to set the new value.
Fixture configuration window:
Buttons and Touch Slider in the 'Fixture configuration' window:
‐ Prev Fixt, Next Fixt: buttons to select the various fixture types that are included in the
show.
‐ Page up, Page Dn: buttons to scroll the window, useful when the fixture has more than 6
parameters.
‐ OK: stores the changes and goes back to the Setup menu.
‐ Cancel: goes back to the Setup menu without storing the changes.
‐ Edit: label to inform the user that the fourth Touch Slider is assigned to modify the value.
Adjustable Options:
Type: can get the values Intensity, Pan Tilt, Color, Gobo, Prism or Blade.
‐
‐ Htp/Ltp: affects the priority criterion of the parameters.
‐ Path: type of fade applied to the parameter. The linear parameters (ex. dimmer, pan, tilt,
zoom) have typically a Linear fade, while the slot wheels have typically a Snap start fade.
‐ Stand by: usually a LTP parameter type is set at the stand-by value when no cue controls it.
If the stand-by value is not defined the parameter stays stable at the latest value set by a
cue or by the editor. For HTP parameters this option must have 0 value.
‐ Hilite: this value is assigned to the parameter when the 'Hilite' status is activated.
‐ Locate: this value is assigned to the parameter when the 'Locate' button is pressed.
47