The Edit Keys; Release; Select; Store - Sagitter QUIVER User Manual

The Edit Keys

Release

Allows to stop the playback of a register:
‐ to stop only one register press Release key + Register switch;
‐
to stop all registers quickly press two times the Release Key.

Select

Allows to select or to scroll between the registers of the current page:
‐ To select the current register press Select + Register switch: pressing the Select key, its
LED goes on and, at the same time, the Register LED goes on; if within 3 seconds
another Register switch is pressed, this turns into the current Register.
‐ Pressing quickly two times the Select key, the next Register is selected.
Page
Allows to select or to scroll between the register pages:
‐ Press Page + Register switch correspondent to the page desired: pressing the Page key
its LED goes on and, at the same time, the LED corresponding to the current page goes
on; if within 3 seconds another register switch is pressed, this turns into the current
page.
‐ Pressing quickly two times the Page key, the next Page is selected.

Store

Activates the "Store" menu: From this menu it's possible:
‐ to save the editor contents into a Cue or into a Palette
‐ to save a "Snapshot" of the console DMX outputs
‐ to save the selected fixtures as a group.
Quickly pressing two times the Store switch the editor contents is saved as a new cue
queued into the current register.

Clear

When it is pressed one time only: all parameters of the selected fixtures in the EDITOR are
set as Empty (not assigned).
When it is pressed quickly two times: all parameters of all fixtures in the Show are set as
Empty ('Clear all' operation).

Menu

This switch has a double function:
‐ With a short pressure, it changes cyclically the Joystick control between "Normal",
"Fine" and "SuperFine".
‐ With a long pressure it opens or closes the contextual "Menu".
15