Packaging, Shipping And Complaint; Warranty And Products Return; Maintenance And Disclaimer; Power Supply - Sagitter QUIVER User Manual

• Do not operate on the product. Refer servicing to an authorized maintenance center.

PACKAGING, SHIPPING AND COMPLAINT

• This unit package has been submitted to ISTA 1A integrity tests. We suggest you control the
unit conditions immediately after unpacking it.
• If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow
inspection.
• Proel is not responsible for any damage that occurs during shipment.
• Products are sold "delivered ex warehouse" and shipment is at charge and risk of the buyer.
• Possible damages to unit should be immediately notified to forwarder. Each complaint for
manumitted package should be done within eight days from product receipt.

WARRANTY AND PRODUCTS RETURN

• Proel products have operating warranty and comply their specifications, as stated by
manufacturer.
• Proel warrants all materials, workmanship and proper operation of this product for a period of
two years from the original date of purchase. If any defects are found in the materials or
workmanship or if the product fails to function properly during the applicable warranty period,
the owner should inform about these defects the dealer or the distributor, providing receipt or
invoice of date of purchase and defect detailed description. This warranty does not extend to
damage resulting from improper installation, misuse, neglect or abuse. Proel S.p.A. will verify
damage on returned units, and when the unit has been properly used and warranty is still valid,
then the unit will be replaced or repaired. Proel S.p.A. is not responsible for any "direct
damage" or "indirect damage" caused by product defectiveness.

MAINTENANCE AND DISCLAIMER

• Clean only with dry cloth.
• Proel S.p.A. reserves the right to change these specifications at any time without notice.
• Proel S.p.A. declines any liability for damages to objects or persons caused by lacks of
maintenance, improper use, installation not performed with safety precautions and at the state
of the art.

POWER SUPPLY

• This apparatus should only be connected to power source using the AC/DC Adaptor supplied
with the unit.
•
This symbol identifies a double insulated electrical appliance, it is one which has been
designed in such a way that it does not require a safety connection to electrical earth.
• This symbol identifies that the equipment has been designed primarily for indoor use.
• The type of AC/DC Adaptor is one of the following:
o P/N: DYS624-120200-15615A MODEL: DYS624-120200W-1 with NEMA 1-15P UL plug (US
version).
PROEL spare part code: 91ADP500001.
6