Cue-List In Live Mode; Cue-List Contextual Menu - Sagitter QUIVER User Manual

Cue‐list in Live mode
A cue list in Live mode allows you to activate single cues directly from the touchscreen. Pressing a
button the corresponding cue is played with the pre-programmed times, allowing to execute the
various cues without a prearranged order, but based on the circumstances. To insert the time
values in the cues you must switch to Qlist mode, insert or modify the values then go back to Live
mode. The 'Lock' button becomes useful to lock the screen on the desired cue-list, ignoring the
triggers of other registers.

Cue-list in Live mode:

Touch Slider in Live mode:
‐ Size: controls the amplitude of possible effects contained in the cue.
‐ Speed: controls the speed of possible effects contained in the cue.
‐ Master: submaster of intensity of the cue.
IMPORTANT: the Live window is to be considered as an extension of the physical commands of the
corresponding playback. When changing page, the Live window will show the cue list
corresponding to the new page regardless of the Lock button status. Only if the cue list is active the
window will continue to show the same cue list, until this cue list is released.
Cue‐list contextual Menu
The four cue list modes (Qlist, Chase, Sequence or Live) share the same contextual menu activated
pressing the 'Menu' key, that allows the operations explained below: the red buttons recall the
general operations while the blue buttons recall the operations of the specific cue-lists.
38