Quiverx Expansion - Sagitter QUIVER User Manual

QUIVERX EXPANSION

The QUIVER console allows to link one or two units of QUIVERX expansion. Each connected unit
makes available 12 extra registers and adds 12 playable cue-list and 1 DMX universe. The
connection between the console and the expansions must be done through a single CAT5 UTP
(1mt) cable that is supplied with the equipment. The connection can be done with the console
switched on or off: if the console is on, it recognizes the expansion automatically at the moment of
linking, making it available immediately.
IMPORTANT: if using only one expansion, you must connect it to the console's EXP 1 port.
When the two expansion are connected, the console is capable to execute 3 pages of cue-list
simultaneously (for a total amount of 36 cue-list): 12 cue-list of the first page (current page) with
the registers of the console, 12 cue-list of the second page with the expansion 1 and 12 cue-list of
the third page with the expansion 2.
Front Panel
Rear Panel
55