Controller Configuration; Pan Tilt Options - Sagitter QUIVER User Manual

Controller configuration

This window, recalled by pressing the button in the Setup menu, allows to customize the 6 sliders
and the correspondent buttons of the console.
The Controller Sliders can be configured as 'Grand master', 'Group submaster' or as 'Playback
master'. In the latter case, it can be configured for each cue list in four modes: Master Intensity,
Master Speed, Master Size or Cross-Fade (see Qlist paragraph).
Obviously, it's possible to set only one slider as Grand master.
Controller configuration window:
Buttons and Touch Slider in the 'Controller configuration' window:
As default the sliders are set as playback master. To configure them as group master, press the
Group master button and using the fourth Touch Slider select the group to be controlled.

Pan Tilt options

For every fixture of the show it's possible to set the inversion of pan and/or tilt and their possible
exchange. The window shows only the fixtures equipped with the pan and tilt parameters. To
open this window, press the 'Pan/Tilt options' button from the Setup menu.
Pan/Tilt Options window:
48