Grand Master And Group Submaster; Setup - Sagitter QUIVER User Manual

Grand master and group submaster

The Controller Sliders can be configured as 'Grand master' or group submaster, allowing to control
manually the intensity of the fixtures in real time. The 'Grand master' and the group submaster
influence the HTP channel only, usually the dimmers of the fixture.
If a fixture belongs to two or more groups, the submaster assumes the lower value.
The 'Grand master' controls the dimmer of all the fixtures in the show, reducing further the values
already reduced by the group submasters.
IMPORTANT: the keys of the submaster operate as flash while the 'Grand master' key is set as
DBO (dead black out).

SETUP

It is possible to enter in the 'Setup' menu pressing the 'Setup' button (always available) from any
contextual menu. The 'Setup' menu allows to set various configuration options and tools.
Setup menu:
‐ Address Patch: it opens the 'Address patch' window that allows to manage the patch of
the show, i.e. to add and/or to remove fixtures from the show setup and to assign to each
one the correspondent 'Dmx Start address'.
‐ Fixture Config: window for changing some configuration parameters of the fixtures present
in the show. Any configuration changes affect only the fixture in the current show and
leave unchanged the fixtures in the library.
‐ Controller Config: configuration and customization of all the controllers.
‐ Pan/Tilt Options: allows to invert and swap the Pan and Tilt function of the show's fixtures.
‐ Backup/Restore: for managing and restoring saved show files, both in SD internal memory
and in USB memory.
‐ Library Manager: it manages the fixture library both in the SD internal memory "SD/lib"
and in the USB memory "USB/lib". It allows to copy / move / erase single files and whole
folders, both in the SD internal memory and in the USB memory.
41