Sagitter QUIVER User Manual page 21

The fixtures' parameters are set by means of the Touch Sliders and the joystick (the joystick always
controls the pan and tilt of the selected fixtures).
Editor in fixture view:
Editor in Group view:
The fixture can be selected one by one using of the correspondent buttons or together using the
'Group' way: you can switch alternately from the fixture view to the group view using the
Fixture/Group button. Pressing the 'Intensity', 'Pan Tilt', 'Colors', 'Gobos', 'Prism' and 'Blade'
buttons the parameters of the selected fixtures are assigned to the 4 Touch Sliders.
To set the attribute values using the palettes, select the fixtures, move to the palette window
pressing the 'Palette' or 'Cmy pal' buttons, then select the chosen palette pressing the
correspondent button.
Each fixture's and group's button has two LEDs.
The LED on the left can be:
‐ Off: The EDITOR doesn't control the parameters of the fixture or group.
‐ Yellow: one or more attributes of the fixture or group are controlled by the EDITOR.
‐ Green: all parameters of the fixture (or all the parameters of the group's fixtures) are
controlled by the EDITOR.
21