Editor - Sagitter QUIVER User Manual

Fixture Browser window:
Pressing the button of the desired fixture the "Add fixture" window appears, that allows to set up
the number of fixtures of the selected type to be added at the show.
Using the lower buttons, it's possible to specify the number of fixtures, the ID, the universe and
the start address of the first fixture. Pressing the 'Add fixtures' button the specified fixtures is
added to the show with consecutive DMX addresses.
IMPORTANT: when a fixture is added to the patch, the set-up information of the fixture is copied
into the show data. Any following modification or cancellation of the library files will not have
influence over the operation of the show.
NOTE: the DMX universes 2 and 3 are available only with the expansions connected.
Add Fixtures window:

Editor

The "Editor" screen is the main window to be used to program the show. Through this window
you control the parameters of the fixtures, allowing the creation of cues and palettes.
The console manages up to 144 cue-list for each show (arranged in 12 pages) and up to 990
palettes.
20