Color Picker - Sagitter QUIVER User Manual

Linear and Arc fan:
Once having selected all the fixtures involved in the editor, press the Fan button from the
contextual menu and the corresponding window will appear. The two series of buttons at the top
allow you to select the parameter you wish to edit.
The 'Linear' and 'Arc' buttons allows to select the fan type (as shown above).
The 'Left', 'Central' and 'Right' buttons allows to select the pivot element (the pin that remains
fixed at the amplitude variation).
'Amplitude' value can be also negative, 'Offset' value is summed with the editor value to define
the pivot position, both are input through the Touch Slider. Increasing or reducing the offset value,
all the values of the fixtures involved are increased or reduced in the same way.
When you press the 'OK' button the parameters are moved to the editor and they are ready to be
stored in a new cue.

Color Picker

The color picker window is used to change the color of the buttons relating to different types of
objects of graphical interface (fixtures, groups, palettes, cues, etc.) and to set graphically the color
for the fixtures provided with RGB or CMY color mixing system.
To change the button's color, you have first to select the buttons, then from the contextual menu
choose 'Buttons color' button.
To assign a RGB or CMY color mix to the fixtures you must select them first and then choose the
'Color picker' button from the contextual menu.
33