Installing A Mini Pci Expansion Card - DFI DT122-SD User Manual

3. Insert the expansion card and secure it in place using the mounting bracket and screw that
you removed in step 1.
Note:
The expansion card used in the above illustrations may not resemble the actual cards.
These illustrations are for reference only.
Chapter 3 Installing Devices
Chapter 3

Installing a Mini PCI Expansion Card

The system board is equipped with 1 full-size Mini PCIe slot that can accommodate a Mini PCIe
card or an mSATA card depending on the model. Here we will demonstrate the installation of a
full-size Mini PCIe card.
1.
2.
Mounting bracket
and mounting screw
Rear view
16
Grasp the Mini PCIe card by its edges and align the notch in the connector of the PCIe card
with the notch in the connector on the system board.
Push the Mini PCIe card down and use the provided mounting screw to secure the card on
the system board.
Mounting Screw
www.dfi.com