DFI DT122-SD User Manual page 43

Set Supervisor Password
Set the supervisor's password. The length of the password must be greater than
one character and less than or equal to 10 characters.
Set All Hdd Password
Set the user password for all HDDs. The length of the password must be greater than
one character and less than or equal to 32 characters.
Set All Master Hdd Password
Set the master password for all HDDs. The length of the password must be greater
than one character and less than or equal to 32 characters.
Storage Password Setup Page
Set the storage password for each detected device.
InsydeH20 Setup Utility
Main Advanced Security Boot
Storage Password Setup
ST3160318AS

↑ and ↓ to change option. ENTER to select an option. ESC to exit.
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
ST3160318AS (Device Name)
Select this option to set a password for the selected device.
Chapter 7 BIOS Setup
Rev. 5.0
Exit
Storage Password Setup
Page
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 7
Main Advanced Security
Device Name:
Security Mode:
Set Storage Password
Set Master Hdd Password
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Security Mode Description
Lock: HDD security status is enabled and lock.
Unlock: HDD security status is enabled and lock.
Change: HDD security status is unlock and users are allowed to change the password.
Disable: Remove the password from the device.
No Access: HDD Secutiry status is not enabled.
Set Storage Password
Set all HDD password. The length of password must be greater than one character.
Set Master Hdd Password
Set master HDD password. The length of password must be greater than one charac-
ter and less than or equal to 32 characters.
When the security mode is set to Lock, input the master HDD password to unlock the
HDD.
Clear the HDD password by pressing "Enter" to disable HDD security and set a new
master HDD password.
43
InsydeH20 Setup Utility Rev. 5.0
Boot Exit
[ST3160318AS]
No Accessed
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com