Chapter 10 - Intel Amt Settings (Only For Intel ® Q170 Chipset) - DFI DT122-SD User Manual

Chapter 10 - Intel AMT Settings (Only for Intel
Overview
Intel Active Management Technology (Intel
®
provide maximum system defense and protection to networked systems.
The hardware and software information are stored in non-volatile memory. With its built-in
manageability and latest security applications, Intel
• Discover
Allows remote access and management of networked systems even while PCs are powered off;
significantly reducing desk-side visits.
• Repair
Remotely repair systems after OS failures. Alerting and event logging help detect problems
quickly to reduce downtime.
• Protect
Intel AMT's System Defense capability remotely updates all systems with the latest security
software. It protects the network from threats at the source by proactively blocking incoming
threats, reactively containing infected clients before they impact the network, and proactively
alerting when critical software agents are removed.
Chapter 10 Intel AMT Settings
AMT) combines hardware and software solution to
AMT provides the following functions.
®
Chapter 10
Q170 Chipset)
®
Enable Intel AMT in the BIOS
®
1. Power-on the system then press <Del> to enter the main menu of the Insyde BIOS.
2.
In the Advanced menu, select Avtive Management Technology Support.
Main Advanced
ACPI Configuration

CPU Configuration

Video Configuration

Audio Configuration

SATA Configuration

USB Configuration

PCI Express Configuration

ME Configuration

MEBX Configuration
Active Management Technology Support

SIO NUVOTON6106D

F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
3. Select Enabled for the Intel AMT Support option.
Advanced
Active Management Technology Support
Intel AMT Support
Un-Configure ME
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
68
InsydeH20 Setup Utility
Security Boot Exit
AMT Configuration
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

InsydeH20 Setup Utility
Enable/Disable Intel(R)
Active
Management Technology
<Enabled>
BIOS Extension.
<Disabled>
Note : iAMT H/W is al-
ways enabled. This Option
Just controls the BIOS ex-
tension execution
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Rev. 5.0
Rev. 5.0
www.dfi.com