Installing a 2.5" or 3.5" SATA Drive
Installing a 2.5" SATA Drive
1.
Remove the 6 mounting screws that secure the drive bay to the system.
Mounting screw
Drive bay
Mounting screw
2.
Align the mounting holes on the SATA drive with the mounting holes on the HDD bracket
and use the mounting screws provided in the drive bay kit to secure the drive in place.
Mounting screws
Mounting screw
HDD bracket
Chapter 3 Installing Devices
Chapter 3
Mounting screw
SATA drive
12
3.
Use the provided mounting screws to attach the HDD bracket to the drive bay.
Mounting screws
Mounting holes
4.
Place the SATA drive bay back in the chassis and install the SATA drive bay using the
mounting screws you removed in step 1.
Mounting screw
Mounting screw
Drive bay
(bottom side)
Mounting screw
www.dfi.com