Table of Contents
Advertisement
lnstalling a 3.5" SATA Drive
1.
Remove the 6 mounting screws that secure the drive bay to the system.
Mounting screw
Drive bay
Mounting screw
2.
Insert the spacers provided in HDD drive bay kit to the anti-shock bumper.
Spacer
Spacer
Chapter 3 Installing Devices
Chapter 3
Mounting screw
Drive bay
14
3.
Align the mounting holes on the SATA drive with the mounting holes on the drive bay;
then use the provided mounting screws to install the SATA drive on the drive bay.
Mounting screw
4.
Place the drive bay back in the chassis and install the drive bay using the mounting
screws you removed in step 1.
Mounting screw
Mounting screw
Drive bay
Mounting screw
Mounting screw
www.dfi.com
Advertisement
Table of Contents
