Installing the PCI or PCIe x16 Expansion Card
Important:
When inserting the riser card,
please select a card within
175mm (as shown on the next
picture).
1. The PCIe x16 on the motherboard is used to insert a TS200-1P or TS200-1E riser card.
To install the expansion card, you need to remove the mounting bracket and the mounting
screw that secure the bracket to the chassis and then remove the bracket. Put the screw and
the brackets in a safe place for later use.
Mounting screw
Chapter 3 Installing Devices
Chapter 3
Mounting bracket
15
Bracket
Mounting bracket and
mounting screw
T200-1P
PCI slot
T200-1E
PCIe x16 slot
www.dfi .com