Installing a PCIe Expansion Card
Important:
When inserting the riser card,
please select a card within
175mm.
1.
The PCIe x16 on the motherboard is used to insert a PCIe expansion card.
To install an expansion card, you need to remove the mounting screw that secure the
bracket to the chassis. Put the screw and the bracket in a safe place for later use.
Mounting screw
Chapter 3 Installing Devices
Chapter 3
PCIe expansion slot
Mounting bracket
15
2.
Take off the shielding plate.
Shielding plate
Mounting bracket and
mounting screw
www.dfi.com