Frequency Inverter (5.5 To 15 Kw) - BONFIGLIOLI Active ACT 201-05 Brief Manual

4.2
The frequency inverter is mounted in a vertical position on the assembly panel by
means of the standard fittings. The following illustration shows the standard fitting.
Assembly is done by screwing the two fixing brackets to the heat sink of the
frequency inverter and the assembly panel.
The frequency inverters are provided with fixing brackets, which are fitted using four
thread-cutting screws.
The dimensions of the device and the installation dimensions are those of the
standard device without optional components and are given in millimeters.
11.0 kW ... 15.0 kW
06/05
06/05

Frequency Inverter (5.5 to 15 kW)

b
b1
x
a1 a
x
fixing bracket top
(fixing with screws M4x20
fixing bracket bottom
(fixing with screws
Dimensions in mm
Frequency inverter
5.5 kW ... 9.2 kW
Standard installation
a2
x ≥ 100 mm
)
M4x60 )
a b c
250 100 200
250 125 200
c
c1
Installation dimensions in mm
a1 a2
270 ... 290 315
270 ... 290 315 17.5
b1 c1
12 133
133
17
17