Frequency Inverter (18.5 To 30 Kw) - BONFIGLIOLI Active ACT 201-05 Brief Manual

4.3
The frequency inverter is mounted in a vertical position on the assembly panel by
means of the standard fittings. The following illustration shows the standard fitting.
Assembly is done by screwing the two fixing brackets to the heat sink of the frequency
inverter and the assembly panel.
The frequency inverters are provided with fixing brackets, which are fitted using four
thread-cutting screws. The dimensions of the device and the installation dimensions
are those of the standard device without optional components and are given in
millimeters.
18
18

Frequency Inverter (18.5 to 30 kW)

b
x
b1
a1
x
fixing bracket top
(fixing with screws M4x20
Dimensions in mm
Frequency inverter
18.5 kW ... 30 kW
Standard installation
a a2
x ≥ 100 mm
fixing bracket bottom
) (fixing with screws
a b c
250 200 290
c
c1
M4x70 )
Installation dimensions in mm
a1 a2
270 ... 290 315
b1 c1
20 165
06/05
06/05