Kyocera TASKalfa 420i Operation Manual page 131

Selecting How to Copy Originals
Select whether you wish to create individual copies on different size paper matching the original sizes or to
produce all copies on the same size paper.
NOTE:
This function is available regardless of whether originals have the same width or not.
The table below shows the finished document sizes for the different original size options.
Use the procedure below to copy mixed size originals.
Ready to copy.
Mixed Size Originals
Place original.
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
OPERATION GUIDE
Downloaded from www.Manualslib.com
Option
Mixed Size Copies
Same Size Copies
Original Width
Off
Mixed Size
Same Width Different
Copies
Width
Same Size
Copies
Top Page Direction
Long Edge Short Edge
Left Left
Cancel
manuals search engine
Description
Originals are detected individually for size and
copied to the same size paper as originals.
Originals are all copied to the same size paper.
1
Press the Copy key.
2
Place originals on the document processor.
IMPORTANT:
widths, be sure to flush them against the document
width guide toward the back of the machine.
3
Press [Org./Paper/Finishing] and then [Mixed Size
Originals].
4
Select [Mixed Size Copies] or [Same Size Copies]
Copies
as finish size.
5
Select the combination of originals from [Same
Width] and [Different Width].
When [Same Size Copies] is selected, select [Long
Edge Left] or [Short Edge Left] as the first original
orientation.
6
Press [OK].
OK
08/08/2009 10:10
7
Press the Start key to start copying.
Copying Functions
When placing originals of different
4
4-9