Kyocera TASKalfa 420i Operation Manual page 293

2
Press [ ] and then [Application].
NOTE:
If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
3
Select the desired application and press [Activate].
You can view detailed information on the selected application by pressing [Detail].
NOTE:
To exit an application, press [Deactivate].
4
Enter the license key and press [Official].
Some applications do not require you to enter a license key. If the license key entry screen does not appear,
go to Step 5.
To use the application as a trial, press [Trial] without entering the license key.
5
When the confirmation screen appears, press [Yes].
IMPORTANT:
application.
Launching Applications
You can launch any application for which Activate is set.
Use the procedure below to launch an application.
1
Press the Application key.
A list of available applications appears on the touch panel.
2
Press the key for the application to be launched.
The application starts up.
3
To exit the application, press [
4
When the application exit confirmation screen appears, press [Yes].
NOTE:
The procedure for exiting some applications may differ.
OPERATION GUIDE
Downloaded from www.Manualslib.com
If you change the date/time while using an application, you will no longer be able to use the
✕
].
manuals search engine
Default Setting (System Menu)
8-61
8