Switching Unit Of Measurement - Kyocera TASKalfa 420i Operation Manual

If you select [Adjust Print Direction], load paper according to the steps below.
Example: copying on Letterhead
NOTE:
When loading cover paper in a cassette or multi purpose tray, load the face, on which printing is
supposed to be done, upward.
Use the procedure below to specify the actions performed for special paper types.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings
Action.
3
Select [Adjust Print Direction] or [Speed Priority].
4
Press [OK].

Switching Unit of Measurement

Select inch or metric for the unit for paper dimensions.
Use the procedure below to change the input units.
1
Press the System Menu key.
2
Press [Common Settings] and then [Change] of Measurement.
3
Select [mm] for metric or [inch] for inch.
4
Press [OK].
OPERATION GUIDE
Downloaded from www.Manualslib.com
Original Paper
Original Paper
manuals search engine
Finished Cassette
Finished Cassette
, [ ]
and then [Change] of Special Paper
Default Setting (System Menu)
Multi Purpose Tray
Multi Purpose Tray
8-11
8