Kyocera TASKalfa 420i Operation Manual page 250

Default Setting (System Menu)
Use the procedure below to select the default file format.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default file format.
4
Press [OK].
File Separation
Select the default file separation setting. The available default settings are shown below.
Off
Each Page
NOTE:
Refer to page 5-13 for file separation.
Use the procedure below to select the default file format.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default for [Off] or [Each Page].
Press [OK].
Density
Set the default density. The available default settings are shown below.
Manual (Normal 0)
Auto
Use the procedure below to select the default zoom setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default density.
4
Press [OK].
8-18
Downloaded from www.Manualslib.com
], [Next] of Function Defaults and then [Change] of File Format.
Item
No file separation performed (all the pages are compiled in one file).
Each scanned page is created into a separate file.
], [Next] of Function Defaults and then [Change] of File Separation.
Item
Set to (Normal 0) in the Manual density.
Set to Auto density.
], [Next] of Function Defaults, [
manuals search engine
Description
Description
] and then [Change] of Density.
OPERATION GUIDE