Checking The Remaining Amount Of Toner And Paper - Kyocera TASKalfa 420i Operation Manual

Checking the Remaining Amount of Toner and Paper

Check the remaining amount of toner, paper, and staples on the touch panel.
Use the procedure below to check the remaining amounts.
Status
Toner Information
Toner Status
Black (K)
Waste Toner OK
Printing Jobs
Status
The items you can check are described below.
Remaining amount of toner
You can check the remaining amount of each color toner as one of 11 levels from 100 to 0%.
Status of waste toner box
You can check the status of waste toner box.
Paper
You can check the size, orientation, type, and remaining amount of paper in each paper source.The remaining
amount of paper is shown by 11 levels from 100 to 0%, however, the paper in the multi purpose tray is shown
by 2 levels as 100% and 0%.
Others
You can check the status of staples and punch waste box.
NOTE:
If the optional built-in finisher, document finisher, or 3,000 sheet document finisher and punch unit are
installed, the Others section provides the status of the punch waste box and whether or not staples are
available.
OPERATION GUIDE
Downloaded from www.Manualslib.com
Paper Others
Size Type Status Type
Ledger Plain 30% Staple A
100%
Ledger Plain 30%
Letter Plain 30%
Letter Plain 30%
Letter
Plain 0%
Device/
Sending Jobs Storing Jobs
Communication
manuals search engine
1
Press the Status/Job Cancel key.
2
Press [Paper/Supplies].Check the remaining
amount of toner and the status of a waste toner box
in Toner Information, and the remaining amount of
paper in each paper source in Paper
Status
OK
Paper/Supplies
08/08/2009 10:10
Status / Job Cancel
7
7-15