Kyocera TASKalfa 420i Operation Manual page 251

Zoom
Select the enlarged/reduced default when paper size/sending size changed after the originals set. The available
default settings are shown below.
100%
Auto
Use the procedure below to select the default zoom setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default zoom setting.
4
Press [OK].
File Name Entry
Set an automatically entered name (default) for jobs. Additional information such as Date and Time and Job No.
can also be set.
NOTE:
Refer to page 4-35 and page 5-25 for name entry.
Use the procedure below to set the default file name.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Press [File Name] to enter the file name in not more than 32 characters.
NOTE:
Refer to the Character Entry Method on Appendix-10<blue> for details on entering characters.
4
Press [OK].
5
Press [Date and Time] to add the date/time to the job, or press [Job No.] to add the job number to the job.
The added information will be displayed in Additional Info.
6
Press [OK].
E-mail Subject/Body
Set the subject and body automatically entered (default subject and body) when sending the scanned originals
by E-mail.
NOTE:
Refer to Send as E-mail on page 3-24.
OPERATION GUIDE
Downloaded from www.Manualslib.com
Item
Copy (send/save) at actual size (100%).
Automatically reduce or enlarge the originals to match paper size/
sending size.
], [Next] of Function Defaults, [
], [Next] of Function Defaults, [
manuals search engine
Default Setting (System Menu)
Description
] and then [Change] of Zoom.
] and then [Change] of File Name Entry.
8
8-19